supply accelerator usg ultracal 30 gypsum cement 15 lbs. plaster

  • usg ultracal® 30 gypsum cement | plaster

    USG Ultracal® 30 Gypsum Cement | Plaster

    USG Ultracal® Brand 30 Gypsum Cement is designed for the patternmaking industry as the ultimate gypsum cement tooling medium. When extreme accuracy and greater surface hardness are required (as in duplicator models), use USG Ultracal 30 Gypsum Cement. It provides extremely low expansion properties, gradual set and a long period of plasticity.

  • gypsum plaster accelerator | usg

    Gypsum Plaster Accelerator | USG

    USG Standard Strength Gypsum Plaster Accelerator reduces set times for veneer and conventional plasters by 10 to 30 minutes; USG Accelerator — Alum Catalyst helps correct plaster dry-out conditions and may also be used to treat sun-faded USG Imperial® Gypsum Base before a lime-containing plaster is applied

  • ultracal® 30 gypsum cement | usg

    Ultracal® 30 Gypsum Cement | USG

    Ultracal® 30 Gypsum Cementis a traditional tooling gypsum cement, specially formulated for close tolerance tooling. Low absorption Ultracal® 30 Gypsum Cement: Is recommended where extreme accuracy and surface hardness are required (i.e. duplicator molds) Provides the lowest expansion of any rapid-setting gypsum cement

  • ultracal 30 plaster - ceramic supply pittsburgh

    Ultracal 30 Plaster - Ceramic Supply Pittsburgh

    Ideal for splash-casting molds and models for phenolic, polyester and epoxy resins, USG Ultracal 30 Gypsum Cement is water soluble – there is no need for organic solvents for cleanup. USG Ultracal 30 Gypsum Cement is noncombustible. Normal Consistency (lbs. water/100 lbs. product) 33 - 38 Dry Compressive Strength 6,500 psi

  • usg ultracal® 30 gypsum cement | plaster

    USG Ultracal® 30 Gypsum Cement | Plaster

    USG No. 1 Pottery Plaster $ 17.95 – $ 28.60; USG Hydro-Stone® Gypsum Cement $ 16.90 – $ 27.50; USG Hydro-Stone® Super X Gypsum Cement $ 17.95 – $ 29.60; USG White Art Plaster $ 15.85 – $ 25.40; USG Ultracal® 30 Gypsum Cement $ 16.90 – $ 27.50; USG Hydrocal® White Gypsum Cement $ 16.90 – $ 28.60; USG Tufstone™ Gypsum Cement

  • ultra cal 30 and white hydrocal (gypsum cement) 50 lbs.

    Ultra Cal 30 and White Hydrocal (Gypsum Cement) 50 lbs.

    ULTRA CAL 30: A very low expansion, gypsum cement used widely in the SPFX industry. Makes hard, super strong precise molds. Ideal for foam latex molds, where durability and detail reproduction are a concern. Can be heated in an oven. (Please note that this product is not for use on skin and is NOT a life casting material. FOR PROFESSIONAL USE ONLY!

  • sculpture supply canada - product detail

    Sculpture Supply Canada - Product Detail

    Drystone is a fast-setting gypsum cement that provides strong, durable casts without the need for dryers, when mixed at the recommended use consistency. It also provides an environmentally-sound alternative to resin-based products and casts with reduced breakage compared to conventional plaster and gypsum cement products. Packaged in 50 Lb bag.

  • sculpture supply canada - product detail

    Sculpture Supply Canada - Product Detail

    Use Consistency (45 parts of water by weight per 100 parts plaster) Dry Compressive Strength 5,000 psi Maximum Setting Expansion 0.390% Density Wet 110.0 lb/ft3 Density Dry 90.0 lb/ft3 Set Time (Hand Mix) 25-35 min.

  • sculpture supply canada - product detail

    Sculpture Supply Canada - Product Detail

    Screeds well under a template but is not as hard or strong as HYDROCAL cement. Technical Properties: Use Consistency (70 parts of water by weight per 100 parts plaster) Dry Compressive Strength 2,000 psi Maximum Setting Expansion 0.200% Density Wet 99.0 lb/ft3 Density Dry 69.0 lb/ft3 Set Time (Hand Mix) 27-37 min.

  • technical specifications - sculpture supply canada - plaster

    Technical Specifications - Sculpture Supply Canada - plaster

    HYDROCAL A-11 Gypsum Cement A high-strength gypsum cement with a low setting expansion. Adaptable to the productions of hard, strong, tough patterns, and duplicator models. Has a shorter period of plasticity, stiffens more rapidly than B-11, sets in about 15-20 minutes after mixing. ULTRACAL B-11 Gypsum Cement A gypsum cement with low setting

  • gypsum cements for topography build-up - n scale talk

    Gypsum Cements for Topography Build-up - N Scale Talk

    Not to long ago, someone suggested USG’s Ultracal 30. Ultracal 30 reportedly has a very low expansion rate of the gypsum cements and it has a rapid setting time. It also has a higher compressive strength than Hydrocal. Price wise Hydrocal and Ultracal are about the same (+/- $1.00 per pound).

  • gypsum plaster usg - kidswhocode.co.za

    Gypsum plaster usg - kidswhocode.co.za

    USG 1 gal. Pink Tint Plaster Bonder - The Home Depot. Compatible with gypsum plaster, cinderblock, stone, gypsum drywall panels and other similar materials (all sold separately) Required for applications of plaster over durock-brand cement board, fiberock-brand abuse-resistant gypsum fiber panels and monolithic concrete (all sold separately)

  • making wedging table and clay recycling plaster boards | tips

    Making Wedging table and Clay Recycling Plaster Boards | Tips

    WHITE HYDROCAL - Used for making plaster objects, a neutral gypsum cement having a normal set of 25 minutes. When formed under a template it is slightly on the “short side” and has a tendency to tear. The setting expansion is somewhat greater than ULTRACAL 30. ULTRACAL 30 - This is a low-absorption gypsum cement for case molds.