1,2-dichloroethylene hazard summary workplace exposure limits
1,2-DICHLOROETHYLENE HAZARD SUMMARY WORKPLACE EXPOSURE LIMITS
1,2-Dichloroethylene should change into clean clothing promptly. * Contaminated work clothes should be laundered by individuals who have been informed of the hazards of exposure to 1,2-Dichloroethylene. * Eye wash fountains should be provided in the immediate work area for emergency use. * If there is the possibility of skin exposure, emergency
CDC - NIOSH Pocket Guide to Chemical Hazards - 1,2
As the nation's health protection agency, CDC saves lives and protects people from health, safety, and security threats. CDC - NIOSH Pocket Guide to Chemical Hazards - 1,2-Dichloroethylene Skip directly to site content Skip directly to page options Skip directly to A-Z link Skip directly to A-Z link Skip directly to A-Z link
1,2-Dichloroethylene | ClCH=CHCl
USE: 1,2-Dichloroethylene is used in refrigerants and in solvents. It is also used as an intermediate in the production of polymers and other chemicals. 1,2-Dichloroethylene is not present in any known consumer products. EXPOSURE: Workers who produce or use 1,2-dichloroethylene may breathe in vapors or have direct skin contact.
1,2-DICHLOROETHYLENE, (TRANS ISOMERS)
The Hazard fields include special hazard alerts air and water reactions, fire hazards, health hazards, a reactivity profile, and details about reactive groups assignments and potentially incompatible absorbents. The information in CAMEO Chemicals comes from a variety of data sources.
CDC - NIOSH Pocket Guide to Chemical Hazards - Ethylene
Exposure Limits. NIOSH REL Ca TWA 1 ppm (4 mg/m 3) ST 2 ppm National Institute for Occupational Safety and Health. NIOSH Pocket Guide to Chemical Hazards.
cis-1,2-Dichloroethylene | ClCH=CHCl
USE: cis-1,2-Dichloroethylene has limited commercial use in solvents. It is also used as an intermediate in the production of polymers and other chemicals. EXPOSURE: Workers who produce or use cis-1,2-dichloroethylene may breathe in vapors or have direct skin contact.
1,2-Dichloroethene, commonly called 1,2-dichloroethylene or 1,2-DCE, is an organochloride with the molecular formula C 2 H 2 Cl 2. It is a highly flammable, colorless liquid with a sharp, harsh odor. It can exist as either of two geometric isomers, cis-1,2-dichloroethene or trans-1,2-dichloroethene, but is often used as a mixture of the two
Draft Scope of the Risk Evaluation for trans-1,2
Peer-Reviewed Literature - Hazard Search Results for trans- 1,2-Dichloroethylene 19 Figure 2-7. trans- 1,2-Dichloroethylene Life Cycle Diagram 25 Figure 2-8. trans- 1,2-Dichloroethylene Occupational Exposure Conceptual Model for Industrial and Commercial Activities and Uses: Worker and Occupational Non-User Exposures and Hazards 32 Figure 2-9
OCCUPATIONAL EXPOSURE LIMITS FOR CHEMICALS | Occupational
Occupational exposure limits (OELs) are tools to help employers protect the health of those who may be exposed to chemicals in their workplace. Under the United Kingdom Control of Substances Hazardous to Health (COSHH) Regulations they define adequate control by inhalation. OELs are set by the Health and Safety Commission (HSC) on advice from its Advisory Committee on Toxic Substances (ACTS
The OSHA Laboratory Standard | Lab Manager
The CHP and safety data sheets (SDS) Permissible exposure limits for OSHA regulated substances used in the work area or recommended exposure limits for other hazardous chemicals in the absence of an OSHA standard; Signs and symptoms associated with exposures to hazardous chemicals used in the laboratory
CHROMIC OXIDE HAZARD SUMMARY WORKPLACE EXPOSURE LIMITS
WORKPLACE EXPOSURE LIMITS The following exposure limits are for Chromium III compounds (measured as Chromium): OSHA: The legal airborne permissible exposure limit (PEL) is 0.5 mg/m3 averaged over an 8-hour workshift. NIOSH: The recommended airborne exposure limit is 0.5 mg/m3 averaged over a 10-hour workshift.
Isocyanate Exposure, Reaction and Protection - Quick Tips
Isocyanate Exposure Levels. The Occupational Safety and Health Administration’s (OSHA) permissible-exposure limit (PEL) for TDI and MDI is 0.02 part per million (ppm) in air as a ceiling limit (C). The ceiling is the highest concentration to which an employee can be exposed.